利用脉冲激光的片上系统芯片单粒子效应试验

为评估脉冲激光试验对研究SoC(片上系统芯片)单粒子效应的有效性,构建了一个65 nm SoC的脉冲激光试验系统,并进行了试验。提出并采用坐标定位法、有源区聚焦法、ΔZ补偿法等针对大规模倒装焊集成电路的试验方法。对SoC的片上存储器、寄存器文件、RapidIO、DICE触发器等部件进行了脉冲激光试验和分析。结果表明:片上存储器对脉冲激光最为敏感,部件的激光试验与相应的重离子试验现象吻合,利用脉冲激光试验可有效研究纳米工艺下大规模集成电路的单粒子效应。     

一种高机动场景下的单快拍DOA估计算法

针对高机动场景下目标信号样本数据少,常规算法难以获取信号子空间的问题,提出一种基于改进协方差矩阵的单快拍DOA估计算法。所提算法首先对接收的单次采样数据做互相关预处理,利用预处理所得数据重构等效协方差矩阵,再基于MUSIC算法完成相干信号的DOA估计。在不损失阵列孔径的同时,算法保证了谱估计精度。计算机仿真表明,在样本量较小的情况下,所提算法能够有效估计出相干目标信号,较现有算法估计精度有所提高。     

Two‐agent scheduling on a single sequential and compatible batching machine

We study two‐agent scheduling on a single sequential and compatible batching machine in which jobs in each batch are processed sequentially and compatibility means that jobs of distinct agents can be processed in a common batch. A fixed setup time is required before each batch is started. Each agent seeks to optimize some scheduling criterion that depends on the completion times of its own jobs only. We consider several scheduling problems arising from different combinations of some regular scheduling criteria, including the maximum cost (embracing lateness and makespan as its special cases), the total completion time, and the (weighted) number of tardy jobs. Our goal is to find an optimal schedule that minimizes the objective value of one agent, subject to an upper bound on the objective value of the other agent. For each problem under consideration, we provide either a polynomial‐time or a pseudo‐polynomial‐time algorithm to solve it. We also devise a fully polynomial‐time approximation scheme when both agents’ scheduling criteria are the weighted number of tardy jobs.     

单片机控制的指挥仪航路产生系统

本文首先介绍单片机控制的指挥仪航路产生系统的原理及组成,重点讨论了目标现在点坐标由数字量到指挥仪所需要的模拟信号的转换方法,最后对该系统的误差结果进行了分析。     

U-D分解单步迭代滤波在飞行状态估计中的应用

针对单步迭代滤波常规算法数值鲁棒性差、滤波易于发散的缺点对误差协方差矩阵使用了 U - D分解 ,从而形成了一种基于 U - D分解的单步迭代滤波算法。该算法提高了数值鲁棒性 ,并且对相关的量测噪声有一定处理能力 ,应用于飞行状态的估计问题 ,获得了较为满意的结果     

单基发射药的热自燃数值模拟与其剩余能量变化研究

建立了单基发射药柱热自燃的数学模型 ,根据模型利用数值模拟的方法计算了单基发射药的中心温度与其剩余能量 ,并对中心温度的模拟结果与实验结果进行了比较。解决了其热分解动力学参数的非唯一性问题 ,为装填有单基发射药各种弹药的热自燃计算提供了依据     

Interception probability simulation and analysis of salvo of two electromagnetic coil launched anti-torpedo torpedoes

Electromagnetic coil launch is an important branch of electromagnetic launch (EML) technology, which is suitable for launching anti-torpedo torpedo (ATT). This paper focuses on the EML parameters and the interception probability of the EML two ATTs salvo. Based on the launching model of a multi-stage coil launcher, the trajectory model of the ATT and the attacking torpedo, a calculation method for the EML two ATTs salvo parameters is proposed, with the conditions of capture and interception given reasonably. An adaptive particle swarm optimization (APSO) algorithm is proposed to calculate the optimal launching parameters, by designing the adaptive inertia weight and time-varying study factors. According to the analysis of the simulation with Monte Carlo method, EML will improve the interception probability effectively, and the interception probability is affected by the launching range. The results demonstrate good performance of the proposed APSO in calculating EML parameters for the two ATTs salvo in certain combat situation. Implications of these results are particular regarding the command and decision in the anti-torpedo combat.     

导弹单发杀伤概率影响因素分析

提出了进行导弹单发杀伤概率影响因素分析的必要性,进行了大量的导弹单发杀伤概率仿真计算,对作战条件和弹目交会条件等重要影响因素进行了深入地分析研究,并对导弹的作战使用、战术决策和目标机的最佳规避机动策略进行了深入探讨。研究成果给飞行员在导弹作战使用过程中进行战术决策提供了强有力的科学理论依据。     

A single‐period inventory placement problem for a serial supply chain

This article addresses the inventory placement problem in a serial supply chain facing a stochastic demand for a single planning period. All customer demand is served from stage 1, where the product is stored in its final form. If the demand exceeds the supply at stage 1, then stage 1 is resupplied from stocks held at the upstream stages 2 through N, where the product may be stored in finished form or as raw materials or subassemblies. All stocking decisions are made before the demand occurs. The demand is nonnegative and continuous with a known probability distribution, and the purchasing, holding, shipping, processing, and shortage costs are proportional. There are no fixed costs. All unsatisfied demand is lost. The objective is to select the stock quantities that should be placed different stages so as to maximize the expected profit. Under reasonable cost assumptions, this leads to a convex constrained optimization problem. We characterize the properties of the optimal solution and propose an effective algorithm for its computation. For the case of normal demands, the calculations can be done on a spreadsheet. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48:506–517, 2001     

二维运动目标纯方位系统的部分可观测性

针对二维空间作匀加速运动的目标,对等速直线运动的单观测站纯方位目标运动分析问题进行了讨论.此时系统是不完全可观测的.本文证明了目标部分运动参数是可估计的,即目标与观察者的相对航向Kr,相对速度与初距离之比Vr/D0,加速度与初距离之比a/D0是可以解算的,并对可估计参数的有解条件进行了分析.